![]() Rufus creates all 5 partitions as specified in the image, it does not matter whether I format anything before or not. I tried to follow this and see no difference. I've tried this and have had no sucsess and am out of ideas other than to get another flash drive and hope it works with that one Person who created the official ♥♥♥♥♥♥ manual for Steam Deck re-image does not know how proper instructions should look like. Thank you so much dude! After spending several hours trying to find the solution, yours is what actually worked. Originally posted by Bubblejuiceman:Has anyone found a solution to this? Even if the drive doesn't work later today when I try it, I'm glad to have made some progress. I've spent 8 hours today trying to figure this out. But the USB doesn't show up at all in my documents folder anymore. There is still 5 partitions in the drive if you look at the windows disk control panel. Then I clicked start and when it finished I didn't get any pop-ups. Now my partition scheme shows up as "MBR" and my Target system as "BIOS (or UEFI-CSM)". I saw only one check box available "List USB Hard Drives". Then I click on Show advanced drive properties. img file, I saw the Partition scheme showing up as "GPT", and the Target system as "UEFI (non CSM). Then in rufus, once my drive was selected and I had selected the. I used a FAT32 formatted usb drive (both 2.0 and 3.0 worked), with the uncompressed. UPDATE: I'm updating this within the same comment because I just found a solution that worked for me, and I would like there to be a log for others who are dealing with this issue. I can't find any Steam or reddit posts that solved this, nothing in Youtube comments either. I don't see a red bar saying that it failed. 5 partitions, 4 paritions not available warning pop-ups, a partition with the folders mentioned in the main post, but only Balena says failed every time, Rufus says 100% in the green bar. I've had my Rufus settings exactly match Youtube videos that had no issues. I've tried different USB drives (one 2.0, the other 3.0). I've tried both the compressed and uncompressed image. I've changed the formatted drive from NTFS to Fat32. I've tried deleting the partitions via the windows disk partitions control panel. Windows blows up with pop-ups saying the extra 4 partitions are not available to access. ![]() Opening: \\.\CDROM1/sources/install.I've tried Balena and Rufus, both fail, both create 5 partitions. NOTE: You can enable the listing of Hard Drives under 'advanced drive properties'ĭisk type: FIXED, Disk size: 1TB, Sector size: 512 bytesĬylinders: 121601, Tracks per cylinder: 255, Sectors per track: 63ĭisk GUID: \ as F: If this device is not a Hard Drive, please e-mail the author of this application NOTE: This device is a USB 3.1 device operating at lower speed.Ĭould not get device number for device \\.\Z: Incorrect function.ĭevice eliminated because it was detected as a Hard Drive (score 8 > 0) Notice: The ISO download feature has been deactivated because 'Check for updates' is disabled in your settings.įound 517 officially revoked UEFI bootloaders from embedded listįound 2351 additional revoked UEFI bootloaders from this system's SKUSiPolicy.p7bįound USB 2.0 device 'Realtek RTL9210B-CG USB Device' (0BDA:9210) SetLGP: Successfully set NoDriveTypeAutorun policy to 0x0000009E Image was downloaded directly from microsoft. Neither latest rufus version or 3.13 or 3.11 worked for me. Same as previous one, ssd with enclosure in my case. I confirmed, by performing an internet search, that these values match the ones from the official image. If using an image, I clicked on the (✓) button to compute the MD5, SHA1 and SHA256 checksums, which are therefore present in the log I copied.Plugging the USB into a different port.I also tried one or more of the following:.I ran a bad blocks check, by clicking Show advanced format options then Check device for bad blocks, and confirmed that my USB is not defective.The log I am copying is the FULL log, starting with the line Rufus version: x.y.z - I have NOT removed any part of it.I clicked the 'Log' button (□️) or pressed Ctrl- L in Rufus, or used DebugView, and copy/pasted the log into the section that says below.I performed a search in the issue tracker for similar issues using keywords relevant to my problem, such as the error message I got from the log.I looked at to see if my question has already been answered.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |